GLOTRENDS M.2 NVMe to PCIe 4.0 X4 Adapter with Heatsink (22x70mm) for NVMe SSD

I've installed a few of these in my servers. They work great and I haven't had any compatibility issues (R330 and R730 is what I've put them in). Great speeds and easy to install. I have tried some others and they wouldn't ever show up, but this one works without issues.

This single M.2 NVME to PCIe 4.0 X4 adapter works perfectly as advertised. I used it for my new NAS build with the ZimaBoard 2 1664. I used a 3D-printed bracket made from ABS to mount the NAS into a 10" mini-rack. I had to remove the I/O bracket since my 3D-printed rack mount case did not have a way to accommodate it, but the adapter board works perfectly without it. I used standard motherboard standoffs with the holes in the PCB to secure the board to my 3D-printed case. The ZimaBoard 2 recognized the SK-Hynix PCIe 3.0 SSD instantly with no issues, and I am using it to store the server's operating system, docker containers, and virtual machines. The two additional SATA SSDs are in RAID1 for speedy network storage. The included heat sink combined with the two PWM server-grade fans in the bottom of the mini-rack are plenty to keep the drive cool. I rarely see the drive temperature go over 30° Celsius. I paid less than $10 for this adapter card, and in my mind the value is unbeatable. I highly recommend this adapter card. It is just plug-and-play. No extra configuration or drivers required.

Works great for the price. I use this with my Samsung 990 pro and no issues so far.

This GLOTRENDS PA09-HS NVMe to PCIe adapter is nearly perfect. It works flawlessly, delivering full PCIe 4.0 speeds with no bottlenecks, and the included heatsink does a solid job keeping my SSD cool. Installation was easy, and the build quality feels premium. However, the red LED is ridiculously bright. It’s not just noticeable—it’s blinding in a dark room. If your case has a window, expect it to glow like a warning light. A simple dimmer or an option to turn it off would have been nice. I ended up covering it with tape to make it less distracting. ✅ Pros: Works perfectly, no speed loss Solid build quality Heatsink keeps temps under control ❌ Cons: The super-bright red LED is annoying No way to disable or dim the LED Would I buy it again? Yes—but I’d be ready to cover up that LED.

Used GLOTRENDS PA09-HS M.2 NVMe to PCIe 4.0 X4 Adapter to install a 2TB Samsung 990 PRO NVMe M.2 SSD in my 10-year-old computer build that is sporting an ASUS GRYPHON Z97 motherboard and Intel i7-4790K CPU. Been running a Samsung 1TB SATA 850 Pro SSD for ten years with no issues at all but, need more hard drive space. I knew going in this was on the edge of working at all but had to give it a shot. A new 2TB Samsung SATA drive is three to four time more expensive than this newer Samsung 990 PRO NVMe M.2 drive. The Z97 only support PCIE 3.0 so I knew before getting started I wouldn't get the full speed out of the drive, if this worked at all, but it would at least be a little faster that the SATA drive it was to replace. After installing the adapter and drive I booted PC as normal. Device manger showed the new devices installed. Running the latest version of Samsung Magician software showed the new drive as available for data migration. It performed the migration on the fly in 45 minutes. Next, I turned off the computer and disconnected my old drive. Went into the BIOS settings, and the new drive showed in the boot menu. Selected the drive and the computer booted right up with the new drive. More as an experiment than a necessity I noticed the drive was setup with old school MBR partition table so decided to upgrade the file system to the more modern GTP partition table using MiniTool Partition Wizard 12. After doing so the computer would not boot until I set the boot mode in the BIOS to UEFI mode by disabling fast boot mode. Computer boots right up and all is well! Also, I didn't use the included heat sink as according to the Samsung Magician software the drive is running well within specs averaging 90-100°F without it. Nice to be able to squeeze more life out of this old computer that is still plenty fast for what I use it for. I highly recommend the GLOTRENDS PA09-HS M.2 NVMe to PCIe 4.0 X4 Adapter with M.2 Heatsink for M.2 NVMe SSD.

great and easy to install

Works.

Easy installation, worked straight away with a 2TB Samsung 970 EVO Plus.

I bought this to expand my overall storage space. I had 2 single 1TB drives and a 500gb drive. As new games are coming out I wanted the additional space without having to remove the 500gb nvme. For the $19 cost to place this below my GPU and still keep the 500gb (for 3d printing models only) this was perfect. Added a WD Black850X 2TB to the Mobo nvme slot and installed the 500gb to this pcie adaptor. works like a charm. No software to install and no drivers. CPU recognized it right away.

I used it for my new SSD (The KIOXIA 内蔵 SSD 1TB NVMe M.2 Type 2280 PCIe Gen 4.0×4) since my Aurora R11 only had one slot for a NVME M.2 to go into, which was for my OS SSD. I ended up putting my OS SSD into this adapter and using the built-in slot for my new SSD. (To take advantage of the PCIE 4.0 speed) It works great and I have never had a problem with it. It comes with a little LED light in it, so you can check if it is powered/slotted correctly. The heatshield+gel works good too. It arrived the day after I ordered it as well, which was great, since I needed it quickly.