FUGO Thermostatic Mixing Valve, 1/2 NPT Solid Brass Temperature Control Valve

Inexpensive and effective. Purchased this to temper water for an outside spigot. It’s possible that it’s reducing the flow more than I’d like but the temperature settings work as expected. Has only been in use about a month so I can’t speak on longevity.

I installed it works great very happy.

i love this mixing valve i used it to make my pressure washer into a warm water one it holds perfect at 100

Built okay, good valve.

Good product works good.

This is my first try at uaing a thermostatic valve. It does a remarkably good job at maintaining temperature, especially consodering my application. I have an RV with limited hot water. I added a tankless booster heater inline with the main water heater. I set the tankless to the highest temperature it goes to (which is scalding/danger level hot). I then ran that to the hit side, and cold water to the cold side. With the cold water shut off (as a test), this will completely shut off the hot water. The same happens when the hot is shut off, so it is capable of full on to full off automatic adjustment. With both on, it is receiving suler hot water on the hot line for a few seconds, which then starts to taper down to moderate hot (as the main hot water tank gets spent) and then tapers down to about 85F when both tanks are spent and the only heat is coming from two constabt on 1440w elements. This valve is able to adjust through all of those stages with minimal manual adjustment. I would estimate is stays within 5 degrees between the extreme inpit temoerature changes. Also, the rv shower head has a pause button that can be used tk pause or slow the flow. When using that, this valve also adapted. Going drom full pause to full on there way probanly more of a 10 degree shift for a second before it stabalized. That is mainly due to the fact that water has to flow for the valve to adjust, so it needs more thab a trickle to stay in target. Still, it kept the water at comfortabke temoeratures through all of these tests. Botton line, I'm a new fan of thernostatic valves. These should be everywhere. I hope to find a thermostatic valve that is meant for my RV shower, instead of the tubes and hack that I have set up now. It's hard to find a thermostatic rv valve though. Most rv valves are made for tubs instead of showers, and I need a thermostatic rv shower valve.

This is a great valve for situations where input water temperature is variable (cabins, RV's, old equipment). It is very nicely made of solid brass. The temperature adjustment turns very smoothly, and the range is excellent! I have no idea why California didn't want me to have one of these - I find it very useful.

This is the best valve to get for a Bidet Seat. It has a temperature balance for hot and cold to prevent the water from getting too hot. It has a stop set at 100F, but pushing the red button allows you to increase the temperature up. It has standard 1/2" inputs and outputs that fit common supply line fittings.The build and finish are outstanding on this valve. It is bright brass, and the chrome plating is perfect. The temperature markings are clear and visible. The knob turns smoothly, and the temperature is accurate.It's perfect to put inline with a standard single input bidet seat.High-quality and exceptional value! Highly recommended.