13" Pro Vinyl Floor Cutter for LVP, LVT, SPC, PVC,VCT, WPC and Rigid Core Vinyl Plank Flooring,Honing Stone Included

Update: The seller reached out to me after this review and sent me another machine. After setting up this machine I noticed the base was pretty tight to the machine itself. I still couldn't get all the smaller screws in the base of the machine however they are threaded correctly this time. With modification I could make it work but really it only needs the the two longer screws on each side to make it work but it's so tight really don't need the screws. The blade can be adjusted square now and make the cuts properly no more misaligned cuts or boards slightly at an angle. So it works great for it's purpose. Based on this new machine and the customer service of the company, I am changing my review to five stars._____Really wanted to like this as I have used a different brand before that worked flawlessly. This one however was problems from the start. 7 of the small screws would not screw into the base to attach the cutting area to the blade area. They were stripped and the holes machined incorrectly. From there the blade was off the whole time. No amount of adjusting made the blade sit strait on the cutting lvp flooring. Cutting a simple plank that was 8.5 inches wide was ok but the cuts were not completely straight and it didn't cut all the way through despite adjusting to the lowest level. A long cut like shown in the pictures is not even doable. I tried a piece that was about 26 inches in length which this should have handled no problem for a long ways cut. Instead it made the cut and then split the board in a different away from the cut making the board unusable. I wound up going to my trusty circular saw. Might have just been a defective one I received but yeah I can't recommend getting this at all.

Excellent tool for vynl flooring great clean cut

Other than a hole in the cutting board it works great. Piss poor handling.

Worked great on LVP with backer, both length and ripping. The rips I made were cutting off about an inch which cracked the cutoff so it would not be useable if you wanted to save, but the finish piece was fine. The straight edge guide fits a little too tight in it's holes, maybe that will wear in with time. Overall I'm happy with it.

The media could not be loaded. If you are doing any kind of flooring this will save you time and money. It cuts cleaner than a saw blade and it saves so much time from going in and out to cut outside. I placed it on my island on a blanket and it saved me from bending over. The preset angle cuts made it effortless. There is a side bracket that will hold the piece in place as you cut it. It will rip long ways. It is light to be able to move around but solid for any cut and won’t move on you when you are cutting . I was just doing my own floor but I am so glad I bought this just for the one job. Totally worth it!

It works very good to cut the planks

My cutter was delivered with a broken piece on it. I emailed them and they responded within 12 hours and I got the new piece quicker than they told me to expect it. With lots of communication. Tool is a time saver. I would recommend.

Works great one complaint when assembling the item and putting the screws in the holes. They were not tapped enough . So I had to tap them myself to get the screws to go in to hold on the side. Otherwise no complaints works great..