USUN Boost Step-up Power Module DC 3.7V-6V High Voltage Generator 400000V

Features:
The high-voltage module uses the principle Tesla coil is made of high-voltage
pulse output voltage current, small size , high efficiency, simple external circuit
(just plug in the switch , the battery can be) discharge intensity violent

Input power:
3.7V Li-ion battery can be used 1 or 2 section , such as 18650 , idle cell phone
batteries (to remove the for protection board , Recommended capacity of
2000mAh or more) or NiCd / NiMH battery pack , 4V or 6V Lead batteries.
This module is a small production with high-pressure science inverter
transformer / booster finished module, the input terminal DC3V-7.2V voltage can
get 200,000 volts for DC high voltage (about 1-2cm arc) at the output can be
used as high school science experiments , electronic equipment, negative ion
generator, high voltage source to use when making small science

Caution:
To avoid high-pressure high-voltage module load electricity use. Must adjust the
high voltage side suitable distance(before electricity, battery voltage and capacity
is proportional to the distance from high-voltage arcing used when testing the arc
distance from short to long experiment , prohibited from beyond the arc when
powered up , the energy can not be released due to high pressure , easily damage the module)
Not fits for long time working, due to the internal slow cooling
How to judge the max. power output can be driven by the battery capacity ?
----- Just text the battery voltage when arcing. If around 6V, it can be driven.
Two sections of small capacity lithium series of 7.2V, measured arc voltage has
dropped to about 4V state , the capacity of the smaller voltage pulled lower.
Recommended to use more than one lithium battery 2000mA , 4000mA. best
conditions with more battery

Package:
1x Power Module

• Voltage: Input DC3.7-6V, output DC400kV - 600KV( Please pay attention to safety when used ).
• High Type : Pulse Current. Dimensions : Φ24 * 65mm.
• High voltage bipolar discharge distance : 10mm-20mm.
• Output voltage lines Length: about 100mm.
• Input power cable length: about 10mm ( red is positive ).