WEN CT9110 110-Inch Track Saw Track Guide Rail and Adapters

I'm impressed with these tracks. I have the Festool track saw and these work perfect. I had to tighten the knobs a little to snug up to the rail but that took 5 seconds. I have one track for the festool and making rips on longer pieces was a chore trying to line it up perfectly but with two, not an issue anymore. Used them yesterday and all went well. The cuts on the end aren't perfect but if you put in the top connector, just put a 6/8' level against them to make sure they're straight with each other then tighten the two sliding connectors. Once I did it, I moved them around, flipped them over...etc and they stayed true. Ripped about 80' in varying orientations and no issues at all. They feel heavy duty, even more so then the Festool track. They're definitely heavier so that's good. They also come wrapped with these two black molded end pieces...keep those. Once you take them apart, put the end pieces back on and that keeps them together and less likely to bang around or damage ends. All in all for $74 this is a steal. I also ordered the Melotough track holder for $40. It can apparently hold 4 tracks. So I'll keep these and the Festool on there so they're all together. Can't speak for other brands but I know Festool uses the same track as Makita, Milwaukee, Metabo and a couple other brands. Might have to adjust the knobs on your particular saw but it's VERY easy and quick. Better then spending double or triple on name brand. Happy cutting!

Used it on 12 boards so far. The track stayed put without needing clamps. Cuts were straight and my Makita saw slid smoothly across the joint between the 2 track sections. The double bar design connecting the sections protects the track from direct contact with the set screws. I'd buy these again.

4.5 Star. These work great with the Milwaukee Track Saw. I ordered two sets for the cost of a single Milwaukee 55" track. The anti tip feature works great. They are smooth gliding. I then cut one of the tracks down to a 31" and 24" track, great for cutting 24" and 12" stock. In total when doing this you end up with a 110" track, 55" track, 31" track and a 24" track. Excellent value. The half star is removed for the following reason. I am not 100% happy with the combined tracks for the 110" full length. From the box the ends are not cut square and hence when tight together they do not make a straight track. I am going to cut them square myself which should make this a non issue, however, I shouldn't have to. It's rather is that everything else being so nice they can't keep the QC on the cut ends better, it's such an easy task.

Is this the same as Fe2tool? No clue, I can't begin to afford their stuff. Does this work, heck yes! It combined with the WEN saw for it and the clamps makes cutting sheet goods down to consistent size a pleasure. No more crooked cuts. The quality is good enough for me. Pretty easy to combine the halves for long cuts, but if you were going to do a lot of larger and smaller sheet cuts I would buy a second section just so you don't have to mess with that very often. I do recommend the clamps made for it, even though I don't need them for every cut they do take the risk out of those longer cuts being exactly where you need them. I've used this on home projects with plywood, and for sign work using assorted materials and would buy again in a minute.

I'm not the biggest fan of WEN tools, but these tracks work perfectly with the Milwaukee track saw. For the price you are getting two 55" tracks at half the price of big red. There's objectively no downside to these compared to OEM. With the money saved you can get a couple sets of good clamps.

These are awesome. I originally bought a Makita track and found that these performed just as good for a fraction of the price. Great for cutting slabs. Easy to use. They seem durable, straight as an arrow, and well-made.

They work well, great price

The rails came in one box held together by these hard plastic end caps which were surprisingly robust in my opinion. There wasn’t any padding like bubble wrap or the little air bags or anything at all but luckily they arrived pretty much in perfect condition. They also work with my MILWAUKEE TRACK SAW & the ANTI-TIP FEATURE functions just like it’s a Milwaukee track. I’m just blown away by how good of a track this is & it was $75 after tax. You cannot beat that. I think that they used to be shorter tracks that Wen made but now it’s a whole 110” split into two 55” tracks. Oh & the connecting bar pieces are a really good design too which surprised me as well. They’re each made up of two long skinny metal bars that sit on top of one another & the top bar has 3 or 4 threaded holes for set screws & it has a tab on each end for the bottom bar to locate in & the bottom bar just has the spot for the tab to fit into so when you put the connecting bars in the track & you line it up straight, when you tighten the set screws it pushes down on the bottom bar spreading out the force of the set screws so it doesn’t damage the rails & the top bar also has like a tapered fit so if the pieces aren’t bent it should help pull them into alignment. But I’m still checking with my straight edge. I definitely recommend these to anyone who needs guide rails for their track saw. You can’t beat the quality for the price.

Se ven de un material resistente y hasta ahora han sido bastante útiles. Van perfecto con la sierra de pista Milwaukee, incluso con el seguro para cuando haces cortes de 45 para que no se te incline de más.

These arrived well packaged, zero damage from shipping, they had nice heavy plastic guards on the ends of the rails. The work just as they should. The build quality matched the Milwaukee tracks I already own. I can confirm the Milwaukee track saw fits these tracks like a glove and helped my make some long straight cuts.

When I purchased these I happened to have a Milwaukee track next to it. The extrusion that the saw slides on is slightly bigger on the Milwaukee, such that when I dialed in my m18 track saw on the WEN tracks, it wouldn't slide easy on the other. So point being the cut strip is your line of cut so if you swap between track brands it will mess that up. Decided to go with the WEN for the way better price point and marginal decrease in quality.

El producto llegó sin una de las partes de plastico que protegen las orillas de los rieles y la otra está rota. Afortunadamente los rieles no tienen daños graves solo un ligero raspón en una orilla. Todavia no he recibido la sierra de inmersión por lo que no he podido probar los rieles.

Track arrived very late, but works well.