VViViD+ Ultimate Headlight Taillight Tint Vinyl Wrap (16" x 30ft, Light Smoke)

Great product, recommend to any installers, Due to its Wrap like design, and bubbles release technology, there are no bubbles. The tint uses a clear layer to protect tint and gloss finish while install, also keeping it scratch resistant. Material is thick and durable, making it also easy to remove for long term use. As well as the wrap like install with a sticky side, it contours curves very welll.

This tint is awesome. It looks amazing, very glossy, with plenty of light visibility still from these LED lights. I'm very happy with the results. A heat gun is highly recommended. I would also check out some YouTube tutorial videos, if you're unfamiliar with the installation process (I watched quite a few myself). Update: I'm going to remove the dark smoke from the headlights, because I'm not getting nearly enough luminescence when driving at night—my headlights just aren't bright enough now. So, plan now is to peel off the dark smoke from the main portion of the headlight assemblies and wrap them in light smoke, then wrap only the upper, flat portion in dark smoke on top of the light smoke. Because of how bright my stock lights are, other oncoming drivers often flash their brights at me as if I have my brights on, when they're actually on dim, so, I do want some amount of decreased brightness... but this dark smoke is too much of a decrease. The light smoke should be perfect. Will update once I've put the light smoke on... Update: I peeled off the dark smoke and replaced it with the light smoke. Then, I laid out a cut line over the top of the light tint using the 3M knifeless tape, then wrapped the dark smoke over the top of the knifeless tape and then made my cuts. The result is light-smoked front door the headlights, with the top and outside portion fully dark. This should be perfect... Just have to test it at night to find out.

looks nice

Tint looks great once you get the hang of working the material just right. Adhesion is great. Quality is fantastic. Bubbles are easy to remove if you know what you’re doing.

Copious amount of material, markings on film help with measuring, and easy to use. Heat gun is needed to stretch material for placement on light. Blade and squeegee are also needed to push out air bubbles. No water/soap needed. The dark color is what I wanted! Thank you. The lower light has the film, not the headlight.

Looks good, really dim with the dark tint, would not recommend for halogen or HID headlights, LED should be fine as that's what I'll be swapping to from HID Edit* added picture with new LED lighte

I install vinyl on vehicles and buildings for a living. I have used numerous VViVid vinyl and tools over the years and this is the first time I have been seriously let down with VViVid products. Negatives. - BIGGEST PROBLEM: Has a purple hue which looked horrible and ended up pulling the vinyl back off. It's hard to see the purple in the pictures, but it's there. Looked like a cheap window tint job. The purple hue is not mentioned on their page. You can see the purple hue once you take the vinyl out of the box. - This is quite dark for a "light smoke". - This vinyl had a really bad haze to it. Lights looked like they needed to be cleaned up due to age. - Very easy to scratch once protective film has been removed. - Description states..... "glass-like finish" - it's not glass like, VViViD's older smoked tints were glossier and more of a glass-like finish this vinyl. "nano air-release so fine" - Honey comb effect easily seen before and after heating up the vinyl. "Ultimate Tints comes with a protective cap which will stretch with the film as you install it." - Is this supposed to be removed after install??? No other mention of this anywhere, but it does have a thin protective film on the vinyl, which came off super easy like it was supposed to. "By far the glossiest headlight tints" - These were not very glossy. "More visible light transmission than has ever previously been possible in a Smoke headlight tint" - I have used Lamin-X tints in the past with no haze and better light output then this vinyl. Pros. - Easy to rip back off. - This vinyl has a protective film on it which you pull off when install is complete. I like the idea of it to prevent scratching the film while installing, but really it's pointless. Vinyl should not scratch up that easily if installed properly. - It was very easy to install with no air bubbles.

Works great for tail lights, lights on or off, day or night. Heat gun will be needed to apply to contours. Adhesion is good and if applied correctly and carefully, the product is fine. HOWEVER! When applied to clear headlights, it will look good in the daytime, but when headlights are on at night, a fogging, haze and cloudiness will appear. This is due to the adhesive on the wrap. I have not been able to avoid this after trying several different methods of applying the wrap (heat, no heat, stretch, no stretch, etc). The headlight brightness is not affected/reduced to a large degree which is a good thing. But the adhesive hazing is ugly to see looking at the lights when lights are on. Of course, I'm in the car driving at night so it's no big deal to me. But to outside on lookers, it's down right ugly.