CICMOD CNC Adjustable Kickstand Side Stand Black Kick Stand for CBR 600 1000 RR 600RR 1000RR

The media could not be loaded.  Minor detail but it does not come with the bolt, to mount it to the frame. I reused the old bolt with some modification.I have an Icebear champion (ct70 clone) with a 125 engine. I put some bigger tires on it and needed a longer kickstand. However the flared side of the mounting bolt did not seat down into the kickstand. I used a dremel and honed out about 1/100th of an inch. Basically the paint and a tiny amount of metal. I checked the threads on the reverse side 1st, to make sure they matched. I wish I had actually got the dimensions to post them for everyone. Once I got the bolt to completely seat down into the kickstand... it was all gravy from there. Great kickstand! Just understand that this is a "universal part". Its not always going to be plug and play. In my case, minimal modification was needed. 20min with having to find my dremel and the right bit for metal.Its super sturdy and have no doubt it will last the life of the bike. It has less play in it than the OEM. I would absolutely buy this again.

okay, so after some research i decided to go with this kickstand for my 2000 cbr 600 f4. The fitment does not list the F4 and under a question, an answer says it will not fit an F4. So i did some digging since the F4i and the F4 are pretty much the same bike when it comes down to frame. The F4 and the F4i is the same kickstand (bracket and sensor, not sure about length). I just installed it, and it fits great, but few things to keep in mind. My kickstand came assembled which means the adjustment bolt was already threaded which obviously is no big deal. After i got the kickstand bolted up, i went to put the spring back on the kickstand and the spring had no chance of going on as it sat. So what i did was take that adjuster bolt out, and flipped the spacer that is there for the spring to grab, so that the skinnier section was at the hex bolt head instead of at the kickstand itself, and it works perfect. The kickstand sensor went right on without any issues. The only down side of this kickstand is that there is no bar or anything that sticks out to make it easier to put the kickstand down when it is up, but that is not a fault of the product itself so i cant take a star away for that since it was pictured exactly how it came

I lowered my bike so it work good for that but it also tilts the bike over a lot more I’m always scared the kick stand won’t hold, haven’t had a probably just how deep it leans in

Easy to install, fits like the OEM but it doesn't has the little piece that sticks out so you can push it down with your feet, that that into consideration. For me it's what i needed, my OEM kickstand broke and i got it fixed but my bike felt too straight and it could tip over with very little effort, before installing it i set it at a slightly lower height that my original kickstand and the result looks the way i expected my bike to lean (not too low but either too straight). I'm attaching some pics so you can Judge for yourself. I still have to figure out if it will last long

2012 Honda CBR600RRPerson I bought it from was short so he cut some of the stock kickstand off so he could hop on and off it. Needed a new kickstand because the bike leans way too far, found this one and decided to try it.1st pic--progress of sanding the inside where bolt goes through (where the aluminum is shown in the bolt hole)2nd pic--kickstand installed3rd pic--before4th pic--after5th pic--had to flip the spring and pull it with a hook to get it to reach, and lost the flange nut for the bolt! (USE LOCTITE)Issues:It did not fit directly, but it did line up with everything enough for me to get it to work. I had some 80 or 100grit sandpaper and sanded down where the bolt slides through to reach the threads on the opposite side. Didn't take too much time, maybe 10 minutes of hand-sanding it and checking, but it was annoying I had to do that.Unsure how sturdy it is. I like to turn my bikes on their kickstands, but I don't know if I'm going to be doing that on this one anymore. Not a big issue.Once it finally fit, I was just happy to have a new kickstand. Kicking it down isn't an issue even without the little rod. So far, I'm happy with it.

Looked great and held the bike up perfectly fine, highly recommend changing out the bolt though. Now it's just small hammer for me since the lower piece is on the highway somewhere!

Worked great for my f4i. Easy install

Fit perfect on 2014 cbr600rr that is lowered 2” very sturdy and stable. Bolted on like factory kickstand. Would purchase again.