012010901 Black 12V BX Trumpet Horn Kit (Toyota)

I purchased this to upgrade my Toyota Corolla iM single horn that comes stock with it along side with the Neoget adapter for dual horn installment. The dual horn is noticeable louder and definitely worth the purchase. The adapter I purchased made the installment super easy. I place the dual horn right behind my grill Toyota emblem and just need to get another nut and screw. Definitely recommend this product

Decided it was time for some new honkers for my 1998 4runner since my oem ones were dinkie and sounding really funny. One of them went bad and gives off a strange sound. Put these on an they are an awesome upgrade. Horns are a much louder & have a deeper tone and demand attention when used! Thankfully toyota is toyota and makes it easy and has been using the same single pin horn connector forever so they plug right into my factory horn wires. For you 3rd gen 4runner and probably 1st gen taco people out there the horns in the toyota kit will fit but you will have to do some slight modifications to one of the horn brackets. but it's very easy. First thing you'll have to do is adjust the connector on the horn. They come out the box at the wrong angle for our trucks and the horn wire won't reach it to put in. They rotate though so just push down hard on the connector to make it spin around. It spins but it's very stiff so you have to push hard, don't be afraid to. First photo is after I rotated them. Secondly, at least for my 4runner the passenger side horn didn't fit because of the ac line right next to it. All I had to do was drill a hole higher up on the bracket to clear it. roughly 31mm from center of the old hole to the center of the new hole. In the pictures it looks like it's touching the ac line but I promise you it's not. Its about a 12mm gap in between it and the horn so it's plenty of space. You will also have to use a regular box end wrench on the passenger bolt now since the horn is moved up and blocks socket access from the front. Overall really liking these new horns so far, they are good value and definitely work well and they fit great even though they are larger than the ones I had before. They aren't touching on any part of the grill or other pieces around it either. Easy good upgrade!

Replaced the wimpy horn on my Highlander with this. Easy plug and play install, and it sounds like a normal car. The electrical connection on the Toyota option fit perfectly. I had to polish the paint off of the screw hole in the mounting bracket though, as the factory horn's circuit grounds through the metal-on-metal contact between it and the car. Keep that in mind

These horns are awesome. They sound perfect and the install was extremely easy and quick. The only thing you need with these horns is a seperate 12v wiring harness that plugs into the existing ground, and 2 leads to plug into each horn. It was $20. Wires get messy after install but nothing a zip tie or black electrical tape can’t take care of.

Installed good and just fine and fit in my 2025 Toyota RAV4 hybrid. Sound is what I expected. The reason I gave 4 starts is solely because both horns were positioned for one side installation, meaning, the long metal part that screws in and grounds the horn, was positioned on both (2) horns that required the plug section to face out instead of down where the plugs are. I moved the metal part around to the opposite side so each horn had the plugs facing down for easy reach of the plug. Other than that, it is all good. Also, the screw hole did not need to be sanded down to show silver metal for grounding. It was already good to go (others have stated that they needed to do this).

Made a world of difference in the toyota rav4. Definitely gets the attention thank you for a great product

Factory fit and finish. The black screws that allow for swivel adjustment are pretty tight, I resorted to putting the unit with the bracket in a vise with a wood block and loosening the nut with a 10mm socket. Otherwise, plug and play. Way louder than the wimpy Toyota OE horns.

Sounds so much better than the oem horn on my 2025 Rav 4! Easy to install and good value for the money. Much louder and more masculine sounding (couldn't think of anything else to explain lol) than the original. I highly recommend! I couldn't post comparison vids since Amazon only allows one vid so I posted a vid of this new horn installed.

Great upgrade for MY25.5 Isuzu MUX, far superior than the standard horns. Plug and play, same connector as the Toyota. Took 5 min to install and sound awesome.

Good quality. Made my horn sound better!. Easy installation too

Always loved hella brand horns. This is no exception. Proper manly horn compared to the stock soft beep. Surprisingly even cheaper than original alternative. Low price, better product. Buy it today my friend.

tienen muy buen sonido, las instale en un corolla 2011, no me arrepiento de mi compra

Installed on my Prius 2011, easy install watched a YT tutorial from NutzAboutBolts title: 2010-2015 Toyota Prius Horn replacement. One thing to keep in mind the negative terminal is your cars body i had to use a bit of sandpaper where you screw in the horn to get a good ground, the horn mounting point was rusty and one of the horns stopped working because of the rust.