⚡ Bond like a boss with precision and speed!
IPS Weld-On 3 is a fast-drying, clear acrylic plastic cement designed for professional fabrication and signage. Delivered in a 4 oz can with a precision needle applicator, it offers a waterproof, low-viscosity formula that cures fully in 24 hours, ensuring strong, invisible bonds on acrylic and plastic materials.
Brand | WELD-ON |
Specific Uses For Product | Fabrication, Sign, POP, Plastic Containers |
Material | Acrylic,Plastic |
Compatible Material | Plastic, Acrylic |
Item Form | Liquid |
Special Feature | Fast Drying |
Color | Clear |
Item Package Quantity | 1 |
Package Information | Can, Bottle |
Item Volume | 118 Milliliters |
Viscosity | Low |
Full Cure Time | 24 Hours |
Water Resistance Level | Waterproof |
Unit Count | 4.0 Fl Oz |
Manufacturer | Weldon |
Item Package Dimensions L x W x H | 4.25 x 3.7 x 2.05 inches |
Package Weight | 0.21 Kilograms |
Item Dimensions LxWxH | 2 x 2 x 4 inches |
Brand Name | WELD-ON |
Part Number | TLLPN-21847771 |
R**A
awesome amazonian!
awesome amazonian!
L**C
Works great on acrylic!
This stuff is great! I used it to glue some safety acrylic for a laser shield.
K**
Works well with acrylic parts.
I needed some glue that would work on some laser cut acrylic parts. This def does the trick. Drys fast and holds well. It is like water so it is kind of hard to work with, or there is a learning curve when using it. A little goes a long way so the amount you get is good and can last a while.
V**R
Great Product but be aware of gas buildup in the can
This product works well. It's extremely thin and evaporates quickly. It was difficult to unscrew the cap from the can but once this was done there is a snap-in insert in the opening that needs to be pried open. When I did this for the first time, the insert went airborne. I used the product and it worked. When I went to use it a second time, the insert popped again but not as high. Just be aware of this when you use it.It also dissipates very quickly. You must be fast when using the product. I used a brush to apply it to the acrylic that I was gluing. It evaporates instantly so I had to re-load the brush multiple times to get enough of the product onto my project. FYI.
B**O
Not as advertised
Change your ad picture if that’s not the applicator bottle you’re going to send with your product. This needs a good needle applicator and the one pictured is the best for this application but I just opened my delivery and found this big cheap applicator bottle. I know there’s a huge pricing difference because I buy both types here on Amazon. This huge nozzle is useless I might as well spoon it out of the container. Lucky for you I need this now but I’m making sure others know that the precise needle applicator in the ad is not what you will receive!!!
P**S
Solvent works but the applicator bottle is a bad joke.
Solvent works fine but the applicator bottle is a joke, it leaked everywhere out of the cap and then stopped working after the first weld. I happened to have some disposable needles for applying paint in small areas of 3d prints so I just tried those and they worked fine, not the cleanest looking weld but I don't care what it looks like. They should just stop selling this with an applicator bottle so no one is taken by surprise when they receive this unusable garbage.
M**G
It works
It works. It's very thin (Thinner than water) and a bit hard to get used to using but once you get the hang of it, it's the only thing to use on acrylic. Look on the web for detailed usage instructions
P**G
Perfect for acrylic
I bought this repair a broken acrylic drawer in my freezer and it worked great . This is not a glue. It actually melts acrylic together.. the joint it creates can be stronger than the original material. It also works perfect on polycarbonate materials.. I have built many explosion proof boxes out of polycarb thick sheets for Boeing using this Weldon product.
Trustpilot
2 weeks ago
2 weeks ago