Visor Proof

This item worked great. I used it on my motorcycle helmet I knew rain was coming so I spayed my visor, I followed the instructions, and as it stated the rain drained right off the visor. The issue is that after a few weeks you will need to reapply the spay. I found that out the hard way. Lucky I had the spay with me, pulled over an spayed my helmet once I dried the helmet. I was good again. Good product

Good stuff as I use it on my motorcycle modular helmet and windshield. Very fast shipper.

I like this stuff better than Rain-X. It goes on easy, doesn't leave a milky or cloudy film like I find Rain-X does, and requires less rubbing to 'finish'. The only down is that water tends to bead up into larger drops before it slides off the visor - Rain-x tends to start sliding off water when the drops are smaller in size. But, this stuff is clearer, goes on and comes off easier, and is in general easier to live with. A little pricey for the amount you get, but it goes a long way and the spray bottle is a convenient size. It has a vinegar-y smell so I apply this with an exhaust fan going. I'd give this a 5-star rating if the drop size was smaller when it begins to stream off the visor, and if it was about 30% cheaper...but I still like it overall. :-)

This stuff works great

util

Did not do much

Water slides right out of the way when you're moving. Coating did not cause any fogginess or obstruction of view. Kept visor nice and clear.

I normally don't take the time to write reviews as I should. But this stuff is a total waste of money. I can't remember now why I did not send mine back for a return. I listened to someone on a Suzuki forum brag on this "smeary" junk. I tried it on my Nolan and HJC visors. Even worse I tried it on my Suzuki windshield. (Thought I'd never get it cleaned back to normal.) Spend a bit more and buy PLEXUS. It cost more - but it is by far - the best plastic cleaner, protectant & polish I have used. But - don't take my word - read the reviews (usually 4-5 stars) on PlEXUS on Amazon and elsewhere.

smell is not good it works ONLY for a minute.

I expected water to just run off, but after 2 applications I realised it just makes the rain not pool so much. The water will bead in smaller amounts making it easier to see. So yeah... it's ok.

Je roule tous les jours à moto et lorsqu'il pleut j'ai besoin que ma visière évavue l'eau rapidement et dès une faible vitesse (40 km/h) J'ai testé ce produit et je valide sont efficacité. Par contre ils disent 2 pulvérisations mais c'est faux. Perso je procède comme suit: - Nettoyer la visière avec une microfibre humide (jamais de liquide à vitre ou papier absorbant car ça détériore/raye la visière) - Sécher avec une microfibre - pulvériser sur toute la visière (ça ne doit pas faire de gouttes qui dégouline sinon ça veut dire qu'il y en a trop) - laisser agir 1 minute - essuyer délicatement avec une microfibre (sans appuyer) en alternant les mouvements verticaux et horizontaux pour qu'il n'y ait plus de traces. - laisser sécher à l'air libre puis re-pulvériser / laisser agir 1 minute / essuyer délicatement avec une microfibre. A faible vitesse il faut parfois tourner la tête pour que les gouttes partent mais au-delà de 50 km/h ça part tout seul.

This stuff is great. I only ride a 125 so i never manage to get any real speed and rain was becoming a problem. with this stuff it isn't anymore. Some people say it doesn't work and others say it works but only if your moving. This is from my own experience using the product so hopefully will put some minds at ease before buying. Clean your visor first and make sure it's dry, apply a few sprays of nikwax to the visor and 1-2 to whatever your using to rub it in. Doing this it helps stop the nikwax from being completely absorbed into whatever rag your using to apply it and actually keep it on the visor. Make sure you don't rub to much or to little, if you feel you havn't applied enough add another spray to the visor and work it in. The next thing is, don't wash or rub the visor after it rains. This stuff is water based so it comes right off once you wipe the visor. I let the visor air dry after a ride and only reapply if i'm not using the bike again for that day or if it's been a week with no rain. I think this is where people are going wrong with the product and are rubbing it off as soon as they get off the bike so the journey home has no nikwax to keep the rain off and then they think the product doesn't work. The key is not rubbing it off once the visor gets wet, just let the visor air dry and only reapply once you feel you arn't using the bike for that day. Your probably thinking this stuff won't last due to me saying it rubs off quick, wrong. I leave mine on the visor for a week if it hasn't rained for a week and then i reapply, it might last longer but i only leave it a week. TL;DR It works, just don't rub it off once you get off the bike and let the visor air dry, only reapply after your done with the bike for that day or it hasn't rained for a week/have a lot of bugs on your visor.

It’s good. It works