🛻 Elevate your Jeep’s edge—fender flares that mean business!
Hooke Road’s Enhanced Flat Fender Flares are precision-crafted for 2007-2018 Jeep Wrangler JK models, featuring heavy-duty 11-gauge steel construction with a textured black powder coat for durability and style. Designed to increase tire clearance and protect against trail hazards, these fenders combine rugged functionality with aggressive off-road aesthetics, backed by a 2-year warranty and lifetime support.
Brand | Hooke Road |
Color | Black |
Exterior Finish | textured |
Material | Carbon Steel |
Item dimensions L x W x H | 48.43 x 8.27 x 25.98 inches |
Item Weight | 47 Pounds |
Style | Off-road |
Auto Part Position | Front |
Vehicle Service Type | 2007-2018 Jeep Wrangler JK 2/4 Doors, Jeep JK |
Fit Type | Vehicle Specific Fit |
Manufacturer | Hooke Road |
Automotive Fit Type | Vehicle Specific Fit |
Item Weight | 47 pounds |
Product Dimensions | 48.43 x 8.27 x 25.98 inches |
Manufacturer Part Number | QP.BXG-007 |
Special Features | Protects your jeep from mud,debris,collisions, Increases tire clearance for optimal suspension articulation, Great looking offroad fenders |
S**S
Heavy duty and look great!
The fender flares look great especially with the Hooke Road inner fender liners. The textured black coating seems durable and gives the flares a nice touch. The front are easy to install but the rears were tough to get on. I ended up taking it to a shop for the rear flares installation. If you are looking for a heavy duty off road look for your Jeep then these flares are for you.
D**R
well built and good looking product
These fenders came well packed and arrived sooner then expected. It included more hardware then needed. I did purchase a nut setter from Amazon as well which came with extra nutserts. I used too many on the first fender I installed, that was my fault.The only issue I ran into is on the rear fenders the sheet metal is angled. So when you install the nut serts the bolts don't line up properly. To remedy this I put the longer bolt in and gently used a wrench to massage the metal into a better position. After that it was easy peasy. Overall great product and I am very happy with how it turned out.
S**
Not an easy fit.
Not really a close fit. Holes don’t align and requires drilling. Lots of bolts, install device is horribly cheap and rounded off quickly. Had to buy a better tool at harbor freight. This is not an easy install, so set lots of time aside. Once done it is a nice look. If wheel well shields need removal, painting of wheel well may be needed because these fenders don’t hide much. Metal is nice and thick and well painted.
D**H
Serious Issues with these Fender Flares
First off all of these fenders had minor damage from the terrible packaging that I had to touch up there is also an additional tool you will need to install the Rivet nuts DO NOT ATTEMPT TO USE THE TOOL THEY PROVIDE IT WILL DRIVE YOU CRAZY. The regular bolts provided are metric with large 13 mm heads I am disappointed in this as button head bolts would have made the installation easier and cleaner I would have paid a few dollars more for better hardware. The hardware bag was short 10 bolts and 10 Rivet nuts that I had to procure on my own there is no reason for this I EXPECT all the parts to be present. Installation is a bear I had to enlarge each and every hole to make the fenders line up with the rivet nuts and was an extremely frustrating process. The fit and finish is not great there are gaps in places that should be flush. My opinion: Don't waste your time or money on this product spend a little more on a better design.
J**K
Acceptable product that has potential to be great
Over all this product was well made and the fit was as it should have been. However the packing was terrible, and 3 of the 4 flares had some abrasion from shipping some through the finish to bare metal. Some aggressive negotiation was required with the seller and a discount was awarded. The install instructions were pathetic, but decipherable with some mechanical ability. A bit more care in the shipping department, and a little more effort with the instruction sheets and this would be a first class product. As is, it is a great addition to a vehicle that is going to be used hard. If your looking for show quality this product is not for you.
M**E
You need a rivet nut driver tool to install these.
We are hard core off roaders and have put these to the test. I have had these up against the rocks and they are tough. The finish scratches pretty easily but I touch them up with flat black spray paint and it blends well. I love the look of these on my rig, just what I was looking for.
S**T
Looks good and pretty easy .buy the tool !!!
Stock Fenders came off easy some plastic plugs and rip off the oem. Make sure they line up use the rivet nut screw gun to put in rivet nuts and bolt on on the back ... front is just nut and bolt looks good and feels solid I haven't stood on em but have put some weight on them and they don't seem to move at all
C**.
Super Dissatisfied!
The front bolted on perfectly no problems whatsoever. But the back fenders have made me take up cursing 🤬! The instructions say drill holes... but there are already holes close to where they expected you to drill. The problem is only about four of the ten holes on the back fender actually line up. Then if you work like a beast you can get four more screws for the M8 inserts. Then the last two don't line up at all so you have to do some clever drilling. My jeep is all scratched up after fighting with the unaligned mounting barrels.Also, they did a shite job of packaging these fenders. Each fender has terrible rub marks that I will need to repaint. Each fender is packaged in a 6mil plastic bag without anything in the box to cushion them during shipping. I'm super upset 😡about the whole back end... the amount of labor and diffcult work to make them work is ridiculous. Don't buy this product!
Trustpilot
3 days ago
2 days ago