Onyx Stainless Steel Popsicle Mold

When there are less expensive popsicle molds out there, to spend this much money on molds seems outlandish, especially when the economy is so up in the air. I looked ahead and realized toilet paper, workout gear and swimming pools are getting out of stock, and with summer here, moms and dads everywhere are going to want to keep their kiddos entertained and fed with summer treats. Popsicles are equivalent to summer so I splurged and bought a set. Best quarantine purchase so far! I went with the metal molds because metal should outlast silicone and plastic and I wanted a set that will last several years. The inside metal of each mold is a matte finish and with the outside nice and shiny. The molds sit nicely in the rack and the lids fit gently on the top of the molds. The lids are not meant to be sealed or fit tightly, more of a covering in the freezer. No big deal though because when the popsicles freeze, the lid is firm and holds well. The set comes with bamboo sticks in a cute little bag and can be replaced with more sticks or regular popsicle sticks. The lids also have rubber discs to slid the sticks into. These work great to hold the sticks securely in the lids and come in a variety of colors which work great to identify different flavors of popsicles if you made more than one at a time, or if the kiddos like one color over the other. These also come in a draw string bag with extras. The only draw back I have noticed is one of our seals got pulled out of the lid and pops out easily. Not a big deal but just an FYI. As far as cleaning, I have found that cream based popsicles tend to leave a residue that it tricky to clean. Two things help this- using a baby bottle brush to get into the crevices or just a quick rinse when you are done eating. Again, not a big deal but just a handy hint. I have not tried using them in the dishwasher since the sink seems to always have soapy water and they are so easy to clean. After all, we are in quarantine- we should have time to clean popsicle molds! As far as recipes, I went online to Pinterest, which we all love, and found some good ones, and I have also just used juice with crushed fruit that I had on hand. I also went crazy and mixed juices with some whipping cream (unwhipped) and some with coconut cream. I have thought about making extra smoothies and pouring it into the molds but never seem to have enough of that leftover. When frozen, I either leave the remaining popsicles in the mold until we eat them or I have taken the remaining out and layered them in a glass storage container with parchment paper for a quick grab. I also place the mold on top of this in my freezer since the rack has wire footings like my freezer shelf and it won't tip over. All in all, these molds are great and well worth the money. Enjoy!

I have never used other ice pop molds, but did a lot of research before I decided to buy this particular Onyx Stainless Steel set of molds. I didn't buy right away because they are a little pricey. But, in the end, I feel it's been well worth the cost. I considered the original Onyx steel molds, but I prefer the classic popsicle shape of this set. I am aware that there are molds that take only 10 minutes, but they are not for me. I just got this product a couple of weeks ago and so far I have made a ton of popsicles. I went nuts like a kid with a new toy. It is so fast and easy to mix up various fruit concoctions, fill the molds and pop them in the freezer. The ice pops easily slide out of the mold. I leave the rack sit out of the freezer for about a minute while I'm doing something else at the sink, then quickly run warm water over the mold just long enough to remove the ice that has formed on the outside. I wrap the pops in plastic wrap and place them in a freezer bag. And, the molds are a breeze to clean. Lots of fun and a healthy tasty treat!

These are so awesome! I am embarrassed to say that I have had these in the box for the last 2 1/2 years. I’m not quite sure why I haven’t used these. Maybe because it was it wasn’t so hot last year. Or maybe I just thought it was going to be too complicated. These are so cool, so easy, so cheap in the long run because you will spend an absurd amount in the grocery store. They are a little awkward getting the popsicle out of the metal container when out of the freezer, But you can just run warm or hot water over it for 5 to 10 seconds and it will slide right out. If you put too much liquid on top it may become messy putting cap on or lifting on the tray or putting in the freezer. They are super easy to clean. I basically just rinse the mold out and I don’t even need to stick a cleaning brush in there. At first I was using a big spoon to pour it into mold. But it was very messy like this., So you should just pour directly from the blender. When inserting the wood popsicle stick leave about three fingers worth exposed. If you are using these for two people in the household I would recommend getting 12 molds. 1/2 of 1 quart of ice cream+ fruit etc fits into 6 molds. This is a great idea if you want to eat less, because normally I would eat the whole half of 1 quart of ice cream. Now I just I am content with two Popsicles, and the best part is that I could make these organic, dairy free gluten-free.

I am in love with this popsicle mold! I know these are pricey, but seriously, they make the best popsicles ever. I love that you use popsicle sticks and not the reusable popsicle piece (because who doesn't lose them?). The gasket in the shield allows the popsicle stick to stand upright. I usually make a batch, put them in individual snack size baggies and then make another batch. We haven't lost a single piece yet as you remove the top and bottom pieces to eat the popsicle. My husband puts the molds in the dishwasher (no problems at all) though I usually use a bottle brush to clean the mold quickly. I love making fudgesicles using chocolate fudge pudding and almond milk. I'm planning on making sliced fruit and coconut milk/water popsicles this weekend. You can even make ice cream popsicles (very helpful if you are trying to limit portion sizes for yourself or your family). Btw, each mold holds almost 1/3 cup of mixture. The popsicles truly look like store bought popsicles. My mom is on a diet and I swear she asks me 3 or 4 times if I gave her the right popsicle. She says they look so perfect and taste so delicious, she can't get over the fact that I make them that way. (The company makes a rocket pop shape, but trust me, it's more phallic than a rocket pop. So unless you are making triple color/flavor pops, you won't want to buy them.)

This is the best popsicle mold out there in my opinion. It’s made out of stainless steel. I tested it and it does not leak and they’re easy to remove. One star is taken off because the bamboo popsicle sticks that came with it were half shattered and splintering. All in all, worth the price but should be priced a little lower.

LOVE these popsicle molds. I was going back and forth trying to decide which ones to buy and these were most recommended by recipe bloggers. I am so happy with how easy they are to use and how well my popsicles turned out. To release the popsicles from the molds, I did as others recommended & just dipped the frozen mold into a cup of warm water for a couple seconds and they came right out. So excited to try out more flavors. Highly recommend this product! Pros: love the individual metal molds, makes it easier to work with. The metal tops with the rubber pieces hold the popsicle sticks perfectly. No “floating” sticks popping back up, the holder kept them straight. Love the metal stand, makes it so easy to set & put in the freezer without taking a lot of space. Cons: the only problem was that I am limited to the 6 molds so I might get a second set so I can make more at one time. Otherwise, they really are perfect. I attached a pic of the first batch: peach & vanilla yogurt swirl. Not the prettiest but they are delicious! These molds make it easy to create layers if you want to get fancy.

These popsicle holders looked really well made. However, when I went to use them, one leaked and had to be thrown away. When they only give you a few holders in the first place...to be missing one completely is pretty ridiculous. Apparently the metal meets in the middle so there can easily be a crack for leaking. Beyond that the little colored disk they use to slide a popsicle stick through isn't stable. As I was sticking it (slowly and carefully) through the hole, it punched through the other side and fell into the juice so I had to throw it out and start again. (could present a chocking hazard for small children or someone unaware it was in the popsicle) I wound up completely removing the disks and using aluminum foil to hold the stick in place. They are also difficult to put into a freezer that is located on the bottom of the refrigerator. I personally wouldn't purchase these again.

I have been trying to avoid purchasing and using plastic, I love that these are an available alternative and are sustainable and long lasting! The popsicle sticks are bamboo and reusable forgoing the need of buying dozens of sticks and storing them. The popsicles I made with these were just watermelon and lime juice I blended in the blender, and after letting them harden in the freezer and then running lukewarm water to loosen and release, they came easily out after just running water for a few seconds. Would recommend.

These ice pop molds are fantastic and worth every penny. I bought these because I wanted something durable that will last, and I don't want to worry about plastics or chemicals. I am really happy with this purchase. I make a lot of popsicles and have tried many molds. This set is my keeper, for sure. The ice pops freeze fast and they release from the molds with ease. The molds are well-crafted and built to last. I measured, and each mold holds 1/3 cup of liquid. I love that the molds are separate from the base. I initially viewed this as a convenience, but now see it as essential to any good ice pop mold. It makes it so much easier to wash and refill, and I can run a bit of warm water over the mold without worrying about melting or releasing any of the other ice pops (which is a problem with the one-piece mold sets). I also really appreciated the great customer service from the seller. One of my molds arrived with a slight defect. When I contacted the seller I got a prompt, apologetic response. They immediately sent a replacement by courier. They included a few packets of their crystallized citrus product in the package. It's nice to receive such thoughtful service in this day and age.

I've really enjoyed these popsicle molds so far! I was looking to avoid plastic, so these were perfect. Pros: - Well made, tray keeps individual molds perfectly upright - individual molds means you can easily take one out at a time - the lids go on relatively easily, and provide good protection from debris and/or freezer burn - I like that it came with good quality bamboo sticks (I will reuse them a couple times) Con: - you have to be a bit careful taking them out of the freezer, especially with warm hands on a humid day! The stainless steel can cause that "getting your tongue stuck to a metal pole in the winter" kinda effect if they've been in the freezer for two long. It wasn't a big deal for me, I just used a cloth to pull it out, and let it thaw on the cloth for 2-3min. And I only noticed this freezing of the fingers after leaving them in the freezer for a few days. But something to be mindful of with kids for sure!

These are fantastic! I wasn't sure whether to purchase this or not because the price is quite high for such a simple device but it works perfectly. The metal makes sure the popsicles don't have that freezer taste at all. It's very easy, with a decent blender, to make your own homemade, healthy fruit concoction and then to pour it into the metal moulds. I like to wait overnight before eating one of those. It's perfect on a hot day. It's also very convenient to be able to take out one popsicle at a time and dip it under hot water instead of the whole plastic tray that you normally buy. Worth every penny! My favorite so far is to blend up fresh strawberries, raspberries, vanilla Greek yogurt, almond milk and some honey and to create popsicles from that.

I absolutely love these. Great for making your own recipe and being able to know whats in it, no extra unnecessary stuff like fake flavors or colours. Pros: These freeze very quickly in metal (4-5 hours) They wash easy. They remove from mold easily (just run under warm water for 5 seconds) Cons: 1 holder leaked and I had to request a replacement (arrived in about 10 days) -- I read in reviews this was common so before filling them all I washed/rinsed and let water stand in each one to see if any leaked-1/6 did The steel has tarnished a bit on the interior The plastic stoppers they come with to put on the sticks to prevent them from sliding are quite finicky, would be great if the steel came with them build on. Otherwise great purchase

Very pleased with the Onyx Steel ice pops - look beautiful. kinda vintage feel - just the right size - love that you can remove one at a time rather than the whole tray - about 5 seconds under the tap and the popsicles release easily - doesn’t take up a lot of room in the freezer The lids snap on but not too easily. wasn’t an issue though The inside isn’t polish - who cares ??? but it’s definately not coated with anything The outside is beautifully polished. These just felt special. Ok that sounds weird but it’s like an heirloom item and made me smile. LOVE the look - came with 3 each of blue, orange, red and green colour circles that you stick the sticks through so you can identify different flavours