Key Fob Keyless Entry Remote fits Toyota Tacoma Tundra Sienna Sequoia Highlander (GQ43VT20T), Set of 2

These. Were great! I looked on YouTube and followed the instructions, perfect.

1. Some vehicles are dealer program only and this procedure will not work.2. Begin with the key out of the ignition.3. OPEN and UNLOCK the DRIVER'S side door. CLOSE all other doors including the trunk.4. Within 5 seconds INSERT the key into the ignition and PULL it out TWICE.5. CLOSE then OPEN the DRIVER's side door TWICE.6. Insert key INTO the ignition then REMOVE it.7. CLOSE then OPEN the DRIVER's side door TWICE.8. Insert the key INTO the ignition and LEAVE it in ignition.9. CLOSE the DRIVER's side door.10. Switch the ignition to ON then OFF.11. REMOVE the key from ignition.12. The door locks will now cycle to confirm the vehicle has successfully entered programming mode.13. PUSH and HOLD the LOCK and UNLOCK button for 2 seconds on the first remote being programmed. As soon as you let go PUSH the LOCK button and HOLD it for 2 seconds.14. The door locks will cycle to confirm successful programming of the remote. If you have any additional remotes to program repeat step 13 if you have no additional remotes proceed to step 15.15. OPEN the DRIVER'S side door. Programming is now complete

"USARemote" Brand: tried over and over but it is complete garbage that didn't last literally a day!I ordered two fobs from this brand through Amazon and they didn't work right away. Opened one up to find a broken button. Something back and reordered two different ones from the same company. They didn't work! Somehow with both the button would get out of sink and just become stiff and not work, and you reopen it and it would work for about 15 minutes and then become stiff and stop working.I ordered a replacement, and on the third try? Absolute garbage again!They would fall off the track or whatever is going on and become stiff and not work and you have to open them over and over and over and try to reset them just to have them only work for about three clicks in a row.Then after trying to use them four or five times I opened it up to see that the button had broken off just like in the first one I ordered.I'M DONE.Returning these and not ordering through this brand again. Stay away. This has been a multi-week round trip of wasted time and all the time doing the funny way that you set them up pulling out the key and opening and closing a door.

Fulfilled and shipped onshore by Amazon (got here in a couple of days). Followed instructions (best to read through a couple of times, you can find a video on youtube). Programmed my 2012 Toyota Tacoma flawlessly. Look and feel identical to factory originals. Couldn't be happier. Caveat: you need to go to their web site (www .remotesremotes. com), look up for your vehicle, print out, etc. Toyota made sure you could not enter programming mode accidentally; the instructions seem inane, you will think you need to dance in a circle, flap your wings, etc., but just follow the directions, and everything will work out). Instructions provided were a piece of paper directing me to the web site. Couldn't be happier. Another reviewer posted the instructions, but here they are again:1. Begin with the key out of the ignition.2. OPEN and UNLOCK the DRIVER'S side door. CLOSE all other doors including the trunk.3. Within 5 seconds INSERT the key into the ignition and PULL it out TWICE.- insert, pull out- insert, pull out4. CLOSE then OPEN the DRIVER's side door TWICE.- close, open- close, open5. Insert key INTO the ignition then REMOVE it.- insert, pull out6. CLOSE then OPEN the DRIVER's side door TWICE.- close, open- close, open7. Insert the key INTO the ignition and LEAVE it in ignition.- insert8. CLOSE the DRIVER's side door.- close9. Switch the ignition to ON then OFF.- turn key to on- turn key off10. REMOVE the key from ignition.- pull key out11. The door locks will now cycle to confirm the vehicle has successfully entered programming mode.- door will lock, then unlock12. PUSH and HOLD the LOCK and UNLOCK button for 1.5 seconds on the first remote being programmed. As soon as you let go PUSH the LOCK button and HOLD it for 2 seconds.- lock & unlock, together, 1.5s- lock, 2s- lock should cycle13. The door locks will cycle to confirm successful programming of the remote. If you have any additional remotes to program repeat step 12 if you have no additional remotes proceed to step 14.14. OPEN the DRIVER'S side door. Programming is now complete.

I've used the products in the past and they have worked well and as described. I will update this review if I find differently for this order.Batteries come installed within the devices even though there are no markings or labels when you receive it saying so. There is no need to open the device to find out.***Don't bother to register the extended warranty unless you want to pay for it. It is only three to five dollars for one or two years extension yet they don't mention that on the little card included that requests you to register the extended warranty. Granted, they don't say it is free yet you don't find out until you go through the whole process of sending your information.*** BEWARE... Their privacy policy is geared to use your information anyway they want and may exclude opting out. They definitely do not give any easy way to opt out.I read their entire privacy policy and my summary is they sell and use customer's private information for just about anything you can imagine. They do list an email if you wish to opt out though in the policy it says they may not have to honor it.I've sent them a detailed and explicit denial of my permission for them to use any of my information for any purposes other than maintaining this purchase and these products.